Saturday, November 10, 2012

Polymer Clay Silverware Textured Beads

I've been on a bead making rampage these days! In between the critter making and the pony sanding, I've been squeezing in a few new ideas. So today I thought I'd share the process of my latest ones with you: silverware textured beads.

I chose three different fancy handled knives for this project. I got these at Goodwill——you never what neat textures you'll find when digging through the silverware bins there!

I used a two-part molding compound to make the impressions and for these I kept the sides fairly low since I wasn't going to be casting beads with them——just texturing.

And here they are all cured. I just love this stuff——it sets up so fast and there's no need for any mold release!

Next I shaped my bead cores in polymer clay, making them a little smaller than I wanted the final beads to be. I baked them in the oven for 15 minutes just to set the clay.

After cooling, I coated each bead with a very small amount of liquid clay and wrapped them in thin sheets of polymer clay.

And then I rolled and pressed each bead into the mold to apply the texture——having the baked core enabled me to get good detail without misshaping the bead. I put each bead on a wooden toothpick, so I wouldn't have to use my fingers to press the beads into the mold.

And here's how they looked after texturing. I baked them for an hour for the final curing and after cooling I gave each bead a wash of acrylic paint to bring out the details.

All finished! There are so many different ways and different textures you could use to make these beads——try it out and have fun!!


Rebekah

31 comments :

  1. Some people are just so darned clever! Great technique ... and work! Thanks for sharing it. :-)

    ReplyDelete
  2. Ok, that's just seriously cool. Thank you so much for showing the process. I might have figured out most of it, but the liquid clay part and the thin sheet would have escaped me. I'm going to totally guess and say the reason you did that was so you could roll the bead in the texture, without destroying the shape of the bead...would that be right? Your final look is just fab!

    ReplyDelete
    Replies
    1. Yes, that's it Shirley! There's nothing worse than smushing beads when trying to texture them!

      Delete
  3. What a great idea and what gorgeous beads you created as a result Rebekah. I'm going to be scouting around for silverware for my metal clay work for sure now - thanks for the tip.

    ReplyDelete
  4. Very cool! Great post and thanks for sharing!

    ReplyDelete
  5. I've always loved silverware textures, and it's ingenious how you've transferred all that over to another medium. You're coloring really does bring out the details, too. Thanks for sharing. (Now I have to find out what a "two part molding compound" is....)

    ReplyDelete
    Replies
    1. I get my molding compound from firemountiangems.com — search H202244BS… and have fun! Once you start making molds, you'll find it's very, very hard to stop! ;-)

      Delete
  6. Great results! Thanks for taking us through the process;)

    ReplyDelete
  7. WOW!!!

    Thank you for sharing some of your amazing talent Rebekah :)

    ReplyDelete
  8. Fabulous beads! Love all the textures, Rebekah... if, like me, you have a collection of mismatched utensils (never did bother getting the fancy-schmancy set LOL) you can even bypass the thrift store. Is that moulding compound a silicone-based one?

    ReplyDelete
    Replies
    1. Yep, I'm not into any of that fancy-schmancy stuff either! I love when things are a little different! lol The molding compound I use is silicone-based. Check it out on firemountaingems.com — search H202244BS. So glad you enjoyed my post :-)

      Delete
  9. This was soooo interesting. Thank you for sharing! I never in a million years would have thought of using old silverware. Very cool!

    ReplyDelete
  10. They are very pretty! I don't understand why you have to wrap in the the thin clay sheets. Is it to coat them in the liquid clay? Love the silverware idea, great thinking!

    ReplyDelete
    Replies
    1. Thanks Gypsea! For each of these beads I started with a baked core, then I put a thin coat of liquid clay onto the core to help the sheets of raw clay stick better… and then I roll the covered bead in the mold… the raw clay picks up the detail and the beads stay the same shape since the core is hard.

      Delete
  11. I've used textures from silverware before but not like this, great idea and I've always loved these beads!

    ReplyDelete
  12. This is such a clever idea!Thank you for sharing this with us!Defenitely thing to try out!

    ReplyDelete
  13. Wow, those are fantastic! I might just get brave enough to mess with that clay one of these days - you make it look so fun!

    ReplyDelete
  14. These beads are awesome! I have tried doing textures but always mess up my bead shape. You have solved a great mystery for me! Thank you!

    ReplyDelete
  15. Wow! I can't believe those are polymer clay! I have renewed respect for what can be done! Thank you so much for sharing your skills with the rest of us!

    ReplyDelete
  16. OH OH OH OH I loved seeing the process and those beads are amazing! I have loved your beads for a while and now I totally see why! You create with fun and beauty in mind!!!!

    ReplyDelete
  17. This is great, Rebekah! I just have one question about the finishing touches, if you can share. After you paint, do you seal or varnish the beads? I'm always worried about the paint coming off, so I seal them. Thanks for sharing this great tutorial!

    ReplyDelete
    Replies
    1. Great question Leah! For these particular beads, I simply put them back in the oven at 200 degrees and bake for 15 minutes to heat-cure the paint and that gives it an excellent hold. Some of my other beads I do use a finish on——I use delta ceramcoat matte varnish and then I always heat cure after that——heat-curing is real trick to making them durable.

      Delete
    2. Thanks so much, Rebekah! I was looking into heat curing, but wasn't sure if it was for specific acrylic paints or not. Great to know!

      Delete
  18. great idea!!!! Thank you for showing us! Hugs, Doris

    ReplyDelete
  19. Beautiful beads! And what a great idea!

    ReplyDelete
  20. Love your beads and you sharing your technique with us in your tutorial! Many thanks!

    ReplyDelete
  21. love this, and thank you soooo much for sharing! I am so green to polymer that all i do is read and read and drool over color!!!! LOL!!! Slowly I am getting there!

    Thx again

    ReplyDelete

We would love to hear what you have to say, please leave a comment.