Here's what you'll need:
*28 inches (71 c.m.) of leather cord (more or less, depending on your preferred length)
*3 Speckled Nugget Beads (or similar beads with holes large enough to accommodate the leather cord
*1 package of Wooly Wire to coordinate with your beads
*12 inches (30.5 c.m.) 22 gauge wire
*2 medium channel beads
*2 small channel beads
*2 jump rings
*Super Glue, or similar fast setting glue
*flat nose or half round pliers
1. Working off the roll of Wooly Wire, glue one end to the top of one of the channel beads, just below the "lip" of the bead. Initially I made a small right angle in the Wooly Wire and glued it down, as in the picture below. But as I proceeded with the other channel beads I tried gluing the Wooly Wire down without the bend and it didn't seem to make any difference. So do whatever you prefer.
5. Insider Tip: Although I'd love for you to feel a close creative bond with Wooly Wire, it is best not to develop an actual physical bond with it. Be careful with Super Glue. As you can see in the picture below I glued some of the Wooly Wire to my fingers.
The "Boho Blue" necklace is available in my shop.