Showing posts with label Jill Egan. Show all posts
Showing posts with label Jill Egan. Show all posts

Thursday, May 29, 2014

China Painting

I have recently been exploring the world of china painting. I was first introduced by a friend, Jill Egan, who creates the most incredible designs on porcelain. I’d always thought it was an old fashioned technique, used for painting flowers on plates, but if you take a look at Jill’s work you will see it can be used to create contemporary designs and beautiful scenes.

Boxing Hares


Zentangle Pendant

I’m always looking for new techniques and ways to add another dimension to my work, and china painting hits the spot. It’s a huge subject, which I have only dipped a toe in to, but in a nutshell, china paint powder is ground and mixed into paint with a mixing medium 



The paint is then used to colour your fired and glazed work. 


Blank glazed cabochon


After painting

The piece is fired again to fuse the paint with the glaze and make it permanent and waterproof.


I’m not a very skilled painter, but I really enjoy painting simple designs on my beads. Usually, designs are painted in layers with a firing between each one, but I’m far too impatient for that, and I like the rough finish of the single layer of paint… I call it rustic!






Just a single colour can really make your designs pop!

While glaze painting is unpredictable, with china paints, the colour doesn't bleed, so you get a good idea of how your work is going to look before you fire it to make it permanent. You can use tools to wipe any paint away that gets where it shouldn't before you fire, and you can paint detailed lines and know that they are going to stay put.

The colours do change slightly once they’re fired and become a bit deeper and more glossy, so I’ve created a palette of all my colours from a cheap white plate.


It’s a fun technique to try out and can open up a whole world of design possibilities, but as with all ceramics related techniques, observe the proper health and safety rules. The powder is very fine and should not be inhaled or ingested, and your kiln should be properly vented while firing.

If you’d like to learn more about the tools and equipment needed for having a go, Jill has a blog with loads of helpful information. Here’s one of my favourite posts on how she does pen work to create her beautiful zentangle designs.

http://kilnfiredart.wordpress.com/teaching-pages/overglaze-painting-tutorials/penwork-on-ceramics-the-basics/


And here’s a little more inspiration to finish off…













Thanks for reading!

Caroline