I had this pretty garden stake that used to have beads hanging off of
it - over time, the cording they were on broke and the beads were
lost. But I still had this cool garden stake.
It
has five little hooks soldered onto it, and I thought, well, rather
than get rid of it, I'll make it a SueBeads project! It was painted
that flat black color, so first I painted it with a metallic spray
paint. Then, I made a rainbow of baroque beads with gorgeous wispy glass
rods from GG Glass.
I
had a think about what I would use to hang the beads, and I decided to
use beading wire and crimp beads. So I went about gathering my
supplies. I did not use my most expensive cording, nor did I use my most
expensive crimp beads, as this will be outside in the weather.
I
needed cutters, pliers and a crimper. I cut five pieces of beading
wire, and decided I needed to start at the end of the wire first. I
made the middle string first, as it was going to be the longest. When I
put the first bead on the wire, I found that the bead hole (even though I
made the bead on a 1/16" mandrel which is a small 1.5mm hole size) was
too big. So I went through my newly acquired seed beads from Bead Fest
Spring and picked out some matching colors.
So
this is how the first bead that went on looks. I used matching beads
so you wouldn't really see them too much. After that, I had to keep
holding the wire up to the garden stake, to make sure all the beads
would fit on in a pleasing manner! I chose the beads in a random size
pattern, instead of making them all the same or making them in ascending
or descending order. Cuz that's the way I roll.
This is how the first string looks. Pretty cute, huh?
Next,
I laid out the other sets of beads - not the entire rainbow spectrum of
beads would fit on the stake, as it is a circle and gets smaller in
length the closer to the outside the strands get, so I decided to do
partial rainbows.
And
here's the finished project! It looks really pretty in the sunlight,
and should last quite a long time given the beading wire is pretty
strong.
I
hope this little project gave you some inspiration to use your beads in
ways other than jewelry! Cuz beads belong everywhere, right?
Susan Kennedy
Showing posts with label Sue Beads. Show all posts
Showing posts with label Sue Beads. Show all posts
Monday, May 16, 2016
Thursday, April 28, 2016
May Component of the Month Giveaway and Challenge - Baby Cabochons!
It's my turn to do the Component of the Month, and I have selected Baby Cabochons! Since everyone here at AJE is mad for seed beads, I thought these would be a good challenge!
Of course, you don't have to use seed beads - you can bezel set these as well. I'm sure you can also come up with even more uses for them! These cabochons measure between 9 and 12mm. They vary in height as well. Do you want to play? Here are the rules:
I look forward to the reveal!
Susan Kennedy
Of course, you don't have to use seed beads - you can bezel set these as well. I'm sure you can also come up with even more uses for them! These cabochons measure between 9 and 12mm. They vary in height as well. Do you want to play? Here are the rules:
- I will give away 2 sets of 3 baby cabochons (you will receive a random set) to 2 winners selected randomly from those who leave a comment below this post. Your comment MUST include your EMAIL AND BLOG address so we can contact you should you win.
- Please — only leave a comment if you can commit to creating a finished piece and blogging about it on the reveal date.
- The names of the 2 winners will be announced on Monday, May1, 2016.
- This giveaway is open to US and international countries, but please be aware that these will be posted from the US and international addresses will have longer postage times… sometimes up to 3 weeks.
- The blog reveal will take place on Tuesday May 31, 2016.
I look forward to the reveal!
Susan Kennedy
Friday, July 10, 2015
A Touch Of Sari Silk Earring Tutorial
Last week I purchased some gorgeous lampwork beads from fellow AJE writer, Sue Kennedy, of SueBeads. I couldn't wait to get started, once they arrived. I made these earrings right away and today I'm going to show you how I did them.
1 pair of earwires
About 8-10 inches of 20 gauge wire
1 pair lampwork beads (These are from SueBeads)
I pair of ceramic charms (These were made by me)
About 8 inches of sari silk, ribbon or fabric
Bead caps to fit the lampwork beads.
Tools:
2 flat nose or half round pliers
1 pair round nose pliers
Cutters
1. Cut the wire in half. Take one of the wire pieces and begin making a wrapped loop at the widest end of your round nose pliers.
2. Slide the ceramic charm onto the wire and complete the wrapped loop with just one complete wrap. Cut the excess wrapped wire and pinch it down with your pliers.
3. Cut the length of sari silk or ribbon in half. Some people prefer the sari silk to have a very rustic, frayed appearance. Others like it a bit tamer. I'm in the latter group, so at this point, I trimmed the frayed sides a bit. Still frayed, but a bit neater. Go for whatever look you like best.
4. Poke one end of a piece through the wire about a quarter of an inch in from the end. You can leave it a bit longer if you prefer and then trim it to your liking once the earring is complete. If you have trouble poking the wire through the fabric, cut the tip of the wire at an angle, to give it a sharper, narrower end.
5. Slide the ribbon up toward the top of the wire. You are basically going to fan-fold it now. So fold the ribbon over and punch it through the wire again. Now fold it back the other way and punch through once more. When you are done, you will have 2 folds and the sari silk will have been pierced 3 times through the wire. Trim the remaining end of the sari silk.
6. Slide one of the lampwork beads onto the wire and then place the bead cap on the wire and slide it down onto the bead.
7. Gently snug all the components together and make a wrapped loop. Attach the earwire and repeat for the other earring. If you wish, you can put a little FrayCheck on the ends of the sari silk, to prevent them from fraying near the wire.
8. Insert earwires in your ears. Go forth and look amazing!
1 pair of earwires
About 8-10 inches of 20 gauge wire
1 pair lampwork beads (These are from SueBeads)
I pair of ceramic charms (These were made by me)
About 8 inches of sari silk, ribbon or fabric
Bead caps to fit the lampwork beads.
Tools:
2 flat nose or half round pliers
1 pair round nose pliers
Cutters
1. Cut the wire in half. Take one of the wire pieces and begin making a wrapped loop at the widest end of your round nose pliers.
2. Slide the ceramic charm onto the wire and complete the wrapped loop with just one complete wrap. Cut the excess wrapped wire and pinch it down with your pliers.4. Poke one end of a piece through the wire about a quarter of an inch in from the end. You can leave it a bit longer if you prefer and then trim it to your liking once the earring is complete. If you have trouble poking the wire through the fabric, cut the tip of the wire at an angle, to give it a sharper, narrower end.
5. Slide the ribbon up toward the top of the wire. You are basically going to fan-fold it now. So fold the ribbon over and punch it through the wire again. Now fold it back the other way and punch through once more. When you are done, you will have 2 folds and the sari silk will have been pierced 3 times through the wire. Trim the remaining end of the sari silk.
6. Slide one of the lampwork beads onto the wire and then place the bead cap on the wire and slide it down onto the bead.
7. Gently snug all the components together and make a wrapped loop. Attach the earwire and repeat for the other earring. If you wish, you can put a little FrayCheck on the ends of the sari silk, to prevent them from fraying near the wire.
8. Insert earwires in your ears. Go forth and look amazing!
Saturday, June 13, 2015
Beach Vacation Jewelry Designing
I'm getting ready to leave tomorrow with the boys on a much deserved trip to the beach! Yay! Fun in the sun, or not, as the weather report seems fraught with clouds, rain and storms. (sad face) As much as that seems like a downer, I don't really care. If I can look at the waves, and hear them thunder to the shore and walk with sand (wet or dry) under my bare feet, I think I will be okay!
If you are like me, when you go on a family trip, you need some creative things to keep your hands busy when you are bored or the rest of the fam wants to do something you are not particularly interested in. What to bring, though? Lately, my jewelry creation interests have been in the fabrication mode...soldering, enameling, metal clay and polymer clay firing. Can't bring the kiln, torch or toaster oven! So, I usually resort to...beads and wire.
This trip I have decided to focus on some unfinished projects first...
These are in various stages of completion...some just need a clasp, some need to have more links added, etc. They have been in my "to do" pile long enough.
I also want to start a new "rosary" project. I put quotations, because this will not be a traditional Catholic rosary in the sense that I am going to use my metal clay components, and I may or may not do the full 50 Aves with 6 Pater beads. I guess we'll see.
This is a perfect beach project for me, as all I need are wire, beads, pliers and a cutter. How to pack it, though, so it doesn't take up much room and is all in one place? I found these cool boxes at The Container Store ages ago and I like the flat, briefcase-like design.
I do have a couple of projects I wanted to get done before I leave...something new for me to wear! My beach jewelry wear is usually very simple...just earrings, and maybe a bracelet or necklace at night.
I hoped to get a couple new pairs of earrings made for me...these are on my table right now:
I would also like to create a beachy-themed bracelet with these gorgeous beads and maybe some leather...love Diana's starfish connector....I have been saving it! Don't Sue Kennedy's ridged lampwork beads fit with Diana's mix perfectly?
So, this is my rainy day beach plan! Who knows, if we have wonderful weather, there may not be any free time to sit and do any of this, but at least I am prepared! I'll try to follow-up and show any finished pieces next time!
How about you? What kind of creative projects do you like to take with you on vacation? We would love to know!!!!
![]() |
| From our trip to the same beach a couple years back! |
This trip I have decided to focus on some unfinished projects first...
![]() |
| My mixed-media pendants and metal clay pendant in various stages. |
I also want to start a new "rosary" project. I put quotations, because this will not be a traditional Catholic rosary in the sense that I am going to use my metal clay components, and I may or may not do the full 50 Aves with 6 Pater beads. I guess we'll see.
![]() |
| My white copper components and gorgeous tiger-eye! |
![]() |
| Nice and flat, so it can stack in your suitcase. |
![]() |
| Just add your materials, toss in your new favorite jewelry magazine for beach reading and for stabilization of the contents and you are all set! |
I hoped to get a couple new pairs of earrings made for me...these are on my table right now:
![]() |
| Gorgeous stoneware by Diana Ptaszynski of Suburban Girl Studio, ceramic flowers by Joan Miller, and my favorite Czech glass beads. Combinations to be decided and probably changed 20 times! |
![]() |
| Yummy mix of beachy colors! |
How about you? What kind of creative projects do you like to take with you on vacation? We would love to know!!!!
Labels:
beading
,
ceramic
,
diana ptaszynski
,
lampwork
,
melismatic art jewelry
,
melismatic morsels
,
melissa meman
,
metal clay
,
mixed media
,
rosary
,
Suburban Girl Studio
,
Sue Beads
,
Sue Kennedy
,
vacation
,
wire work
Wednesday, April 22, 2015
It just didn't have "IT"
Have you gone back to look at your designs from when you began beading and you liked a piece but it just didn't have the "it" you were looking for? This was mine.
Awhile back I received this gorgeous Seahorse pendant from Marla of Marlasmud which I was totally in love with and wanted to get a necklace made right away. I do not often revisit my designs because I have to say the thought of ripping out all those little beads is well, for lack of a better term, SCARY! I just kept looking at this one and saying to myself that "I just don't see it". So I was searching through my art bead stash and came across the beads I got from Sue of Suebeads at Beadfest last year.
That blue cab just said "pick me" so you know I had to. I began by getting the cab ready for embroidery. I had some gorgeous marbled turquoise seed beads and I wanted to bring out more of the gold in the Seahorse.
This was perfect! I loved so much I also needed to figure out what type of chain. I knew I wanted this piece to be long. I am loving the feel of a long necklace. I remembered Lindsay had told me about her figure 8 chain and I know the blend of both the gold and turquoise would produce the look of the ocean in the sunlight.
It turned out exactly as I had envisioned and I am pleased as punch. Now the design has that "IT" I had been looking for. Have you ever revisited an old design and made it new again?
Awhile back I received this gorgeous Seahorse pendant from Marla of Marlasmud which I was totally in love with and wanted to get a necklace made right away. I do not often revisit my designs because I have to say the thought of ripping out all those little beads is well, for lack of a better term, SCARY! I just kept looking at this one and saying to myself that "I just don't see it". So I was searching through my art bead stash and came across the beads I got from Sue of Suebeads at Beadfest last year.
That blue cab just said "pick me" so you know I had to. I began by getting the cab ready for embroidery. I had some gorgeous marbled turquoise seed beads and I wanted to bring out more of the gold in the Seahorse.
This was perfect! I loved so much I also needed to figure out what type of chain. I knew I wanted this piece to be long. I am loving the feel of a long necklace. I remembered Lindsay had told me about her figure 8 chain and I know the blend of both the gold and turquoise would produce the look of the ocean in the sunlight.
It turned out exactly as I had envisioned and I am pleased as punch. Now the design has that "IT" I had been looking for. Have you ever revisited an old design and made it new again?
Labels:
ammonite
,
Kristen Stevens
,
Marlasmud
,
sea theme
,
seed beads
,
Sue Beads
Thursday, August 14, 2014
Beads Make Us Happy...
Yes it's true... even when we're suffering from the stresses and
strains of preparing for a show Like Bead Fest we know we'll get through
it in the end because we love beads and we know you love beads.
Half of the AJE team are currently in headless chicken mode trying to finish up their preparations before heading off to set up for the show one week today...yes ladies 1 week!
Today I thought I'd give you a little preview of what you can expect to find at the show as a result of their efforts and if you're not going don't worry - shows usually mean lots of new stock for online shops after the event so September should be a bumper month.
Now sit back and enjoy our little trailer and if you're coming to Bead Fest don't forget to come and say hello.
Lesley
The Gossiping Goddess
Half of the AJE team are currently in headless chicken mode trying to finish up their preparations before heading off to set up for the show one week today...yes ladies 1 week!
Today I thought I'd give you a little preview of what you can expect to find at the show as a result of their efforts and if you're not going don't worry - shows usually mean lots of new stock for online shops after the event so September should be a bumper month.
Now sit back and enjoy our little trailer and if you're coming to Bead Fest don't forget to come and say hello.
Lesley
The Gossiping Goddess
Tuesday, June 17, 2014
Seven Day Giveaway - Day 2!
The Art Jewelry Elements reader community is awesome: creative, invested, and enthusiastic! And on June 7th, you pushed our Facebook page over the 1,000 "likes" milestone. To celebrate, we're hosting seven days of give-aways - two gorgeous art jewelry components given away every day to a single reader.
Today's components are offered by yours truly and Susan Kennedy.
Sue's glass cabochons are just stunning, and I love this ammonite version. (Sue was the hostess for last month's Component of the Month challenge - her gorgeous cabochons and beads inspired some wonderful creations!)
Today's components are offered by yours truly and Susan Kennedy.
Sue's glass cabochons are just stunning, and I love this ammonite version. (Sue was the hostess for last month's Component of the Month challenge - her gorgeous cabochons and beads inspired some wonderful creations!)
This is a textured Keum Boo pendant - sterling silver with real 24 karat gold, patina'd to make the gold pop. It has a simple loop bail on the back and would be a great starting point for a one-of-a-kind necklace. (FYI, this is a demo piece from a recent class and is not hallmarked.)
Want a chance to win these components? Here's the scoop!
- The giveaways run from Monday, June 16 through Sunday, June 22, with a different prize of 2 art jewelry elements each day.
- Each day of the contest will feature something from two different AJE contributors
- For a chance to win that day's prize, leave a comment on that day's blog post. AND MAKE SURE YOU LEAVE AN EMAIL FOR US TO CONTACT YOU!
- We will draw a winner from each day's post, so don't forget to comment each day.
- ALL winners will be announced on Monday, June 23rd.
- This giveaway is open to anyone living on planet Earth.
- Each person is eligible to win only once. (Unless you're a member of the AJE team. Then you cannot win any of the days. Which is a bummer, because there is some seriously cool stuff being given away!!)
We love our readers - you're the reason we post here every day! And we're grateful to you for helping us make this such a great community!
Now, ready to enter for these great components? OK, three.... two.... one..... GO!
Until next time -
Labels:
1000 likes
,
art jewelry components
,
artisan component
,
Francesca Watson
,
Francesca Watson Designs
,
give away
,
giveaway
,
Roadhouse Arts
,
Sue Beads
,
SueBeads
,
Susan Kennedy
,
thanks
Tuesday, June 10, 2014
Tutorial - Button Mold
One of my fellow AJE team members wanted to know how I make my button molds so I thought I would share how I do it with you too! This is just a culmination of my experience - yours may be different and you may make yours totally differently than I do and that's ok - there's lots of ways to do lots of things!
Supplies needed:
Two-part silicone mold making putty
Ceramic Tile
Plastic Measuring Spoons
Buttons
Tip - make sure you have all your supplies together before you begin. Once you mix the putty, you only have a certain amount of time before the putty sets. The putty is not inexpensive so you don't want to waste it!
First, start off with a button. Or two. Or heck, just a whole pile if you want! Tip - choose a button that has a nice curve to it.
Tip - to measure the silicone putty, I like to use inexpensive plastic measuring spoons I purchased at the grocery store. Mark them for the two colors of your putty - here, I used a silver sharpie to mark W for white and P for purple. This way, you won't contaminate your two colors before you mix them.
I have no idea where I purchased this silicone putty - I wish I could remember. It was a long time ago. Which is also a testament to how long this particular putty lasts and still works. I have heard that Michael's now sells less-expensive two-part silicone putty, but I haven't tried it so I have no idea how it works. If you really want good, high-quality molds, I recommend buying high-quality putty even though it's more expensive, especially if you plan on using the molds many times.
Measure out your two colors of putty in the measuring spoons to ensure you get an even amount of each color. This helps the chemical reaction that occurs when you mix your putty work correctly. Tip - use a larger measure of putty than the button you are pressing. Remember, you are going to be pressing the button down and need enough putty to make it work!
Put the two pieces of putty together on a piece of ceramic tile. Tip - This is to protect any surfaces you may be mixing on, and to keep the putty clean.
I like to tear the putty blob in half, put it back together, and tear again several times in this way to begin the mixing process.
Here's what it looks like after several tears - keep doing this, and begin to smoosh (yes, technical word) the colors together, blending them until you can see no white left.
Here's how it looks after blending. Note you can't see any white in the mix.
I then like to form a ball with the putty by rolling it in my hands, just like rolling cookie dough!
I put it flat on the tile, and then just very gently smoosh (there's that technical word again) it down so it becomes a little bit flat.
Then, I position my button on top of the putty in the center before I push it down. Tip - if you don't like the position of your button, just roll the putty and start again. But remember, you only have a certain amount of time before the putty sets.
Here's a photo of the button pushed down into the putty. You're just going to have to get the feel for how far to push the button down - you can't push it too far down or it will be too thin on the bottom.
Push with an even pressure on the button.
Now to wait. You must wait the prescribed amount of time for your putty to set. This is a good time to go wash your hands, as you have chemicals from the silicone putty mold on them. Tip - use the very edge of your fingernail to gently push into the side of the mold. If the silicone does not retain the fingernail mark, it is ready to unmold.
Once you've waited the required amount of time, take your mold (button and all) off the tile and gently twist the mold to the side to release the button. There should be no rips or distortion if you waited the correct length of time. If you are in doubt, just wait longer!
And here's what your button mold will look like! I hope you enjoyed this tutorial and that it helped you if you are having difficulties getting your button molds just right!
Susan Kennedy
SueBeads Etsy
SueBeads Web Site
Supplies needed:
Two-part silicone mold making putty
Ceramic Tile
Plastic Measuring Spoons
Buttons
Tip - make sure you have all your supplies together before you begin. Once you mix the putty, you only have a certain amount of time before the putty sets. The putty is not inexpensive so you don't want to waste it!
First, start off with a button. Or two. Or heck, just a whole pile if you want! Tip - choose a button that has a nice curve to it.
Tip - to measure the silicone putty, I like to use inexpensive plastic measuring spoons I purchased at the grocery store. Mark them for the two colors of your putty - here, I used a silver sharpie to mark W for white and P for purple. This way, you won't contaminate your two colors before you mix them.
I have no idea where I purchased this silicone putty - I wish I could remember. It was a long time ago. Which is also a testament to how long this particular putty lasts and still works. I have heard that Michael's now sells less-expensive two-part silicone putty, but I haven't tried it so I have no idea how it works. If you really want good, high-quality molds, I recommend buying high-quality putty even though it's more expensive, especially if you plan on using the molds many times.
Measure out your two colors of putty in the measuring spoons to ensure you get an even amount of each color. This helps the chemical reaction that occurs when you mix your putty work correctly. Tip - use a larger measure of putty than the button you are pressing. Remember, you are going to be pressing the button down and need enough putty to make it work!
Put the two pieces of putty together on a piece of ceramic tile. Tip - This is to protect any surfaces you may be mixing on, and to keep the putty clean.
I like to tear the putty blob in half, put it back together, and tear again several times in this way to begin the mixing process.
Here's what it looks like after several tears - keep doing this, and begin to smoosh (yes, technical word) the colors together, blending them until you can see no white left.
Here's how it looks after blending. Note you can't see any white in the mix.
I then like to form a ball with the putty by rolling it in my hands, just like rolling cookie dough!
I put it flat on the tile, and then just very gently smoosh (there's that technical word again) it down so it becomes a little bit flat.
Then, I position my button on top of the putty in the center before I push it down. Tip - if you don't like the position of your button, just roll the putty and start again. But remember, you only have a certain amount of time before the putty sets.
Here's a photo of the button pushed down into the putty. You're just going to have to get the feel for how far to push the button down - you can't push it too far down or it will be too thin on the bottom.
Push with an even pressure on the button.
Now to wait. You must wait the prescribed amount of time for your putty to set. This is a good time to go wash your hands, as you have chemicals from the silicone putty mold on them. Tip - use the very edge of your fingernail to gently push into the side of the mold. If the silicone does not retain the fingernail mark, it is ready to unmold.
Once you've waited the required amount of time, take your mold (button and all) off the tile and gently twist the mold to the side to release the button. There should be no rips or distortion if you waited the correct length of time. If you are in doubt, just wait longer!
And here's what your button mold will look like! I hope you enjoyed this tutorial and that it helped you if you are having difficulties getting your button molds just right!
SueBeads Etsy
SueBeads Web Site
Labels:
button mold
,
free tutorial
,
Sue Beads
,
Sue Kennedy
,
two-part silicone putty
Subscribe to:
Posts
(
Atom
)










































