Tool Care

A while back, I wrote about finally getting my first set of Fretz hammers for my workbench. It was kind of a big deal, both because it was a pretty significant financial investment and because I had wanted them for a long time.

But now comes confession time: I haven't used them all that much.

Gasp!

I know. I fondle them a lot, and I leave them out on my bench so I can visit with them, but I used the planishing hammer for a substantial project and it's sweet little face got a bit marred up. So I set out to find some good information about how to care for my new tools. Here's what I've found so far:

1. Not a lot.

Do a Google search for "dressing hammers" and what you get is page after page of people posting in various forums - mostly blacksmith and ironwork - about needing to dress their hammers and looking for good instructions. So I am on a quest for information about tool care - and not just hammers, but everything on my bench.

For starters, here's a video about hammer dressing from a guy named Modern Blacksmith on YouTube that will give you an introduction to the basic idea behind hammer dressing. (Skip ahead to about the 4:15 mark if you don't want to hear about the project he's working on and the history of the hammer he's dressing.)

A while back, we did a little rudimentary hammer dressing with a rotary tool at Wired Designs - see the sparks?

Our goal was to clean up the riveting edges on our classroom hammers, which had been somewhat abused over the last year. As you can see, we were using a small rotary tool instead of a flex-shaft - and while it worked really well and got the job done, it wasn't more than just basic maintenance.

So I've got two mid-sized riveting hammers I'm going to try to dress, plus my poor little marked-up Fretz, and I'll report back to you in my next post with the good, the bad, and the ugly. A few words of caution if you're going to try this too:

1. Eye protection is a MUST. Don't even think about working without it.
2. Make sure any grinders, wheels, or flex-shaft or rotary tool components you use on your steel tools are kept strictly separate from anything you might use on your copper, brass and silver jewelry materials to avoid cross contamination. If possible, use a completely separate work area - but at a minimum, plan on doing a thorough cleaning afterwards.
3. The video shows the use of a single grit grinder. From my reading, we'll need to plan on doing a lot of hand-work after the grinding in order to get mirror-polished hammers suitable for jewelry work - from 400 grit all the way to 1000 grit or higher.

Keep your fingers crossed!

Until next time -

On the Workbench: Still Lifes

Like many of you, I headed into the holidays at full speed. There's always so much going on - gifts to finish, shopping to do, items to ship - and no matter how much advance planning goes into the preparations, there are always two or three or seventeen things that come up at the last minute. Usually the two weeks right after Christmas would be when the studio would get cleaned and inventory would be done in preparation for getting our taxes finished. But this year, a little monkey wrench called "The Flu" got thrown into the works - and let me tell you, the capital F Flu is nothing to fool around with.

The result is that three weeks after Christmas, instead of having accomplished our year end tasks and new year's goal setting, our household is slowly climbing out of that haze that comes with having been really sick and reacquainting ourselves with the real world. In my case, that includes my studio, which I haven't seen in nearly a month. So here's an impromptu look at the condition of my studio, in the form of a few still lifes of my workbenches, untouched since the Christmas rush.

Metal Workbench

Glass and Enamel Workstation

Fabrication Table

How is your workspace faring in the New Year? If you've got photos, use the linky tool below to share them - we'd love to see!

Until next time -

POST YOUR STUDIO PHOTOS HERE!