A couple of weeks ago I got a great book in the post on Resist and Masking Techniques by Peter Beard. I'm not going to review the book today, I don't tend to read books properly, I skip through the pages until something catches my eye, I skim over what I need to know and go and play. But if you like what you see, here's the front cover so you can get yourself a copy.
The accompanying text explained that to create sharp rather than soft lines in their work, they used watercolour masking fluid... that was all I needed, so I set about making raku clay beads and bisque fired them ready for testing.
I decided I was going to glaze these beads in crackle white rather than using slip, and mask areas to leave the clay bare for firing. When put in the reduction bin, the smoke from the combustive materials would colour them in black.
I dug out my masking fluid and painted the veins in the leaves.
I found when using it, it was easier to pool fluid and drag it to where you wanted it, rather than the usual dip and paint which left too thin a coating of masking fluid.
And always looking for a way to use my Cameo for anything I try, I cut a couple of simple designs in vinyl and stuck them on to some of the bisque.
The beads were glazed and while the glaze was still wet, the masks were removed.
This is the result from the vinyl mask.
And this is from the masking fluid.
On first impressions, the vinyl mask left a cleaner line when removed. I think because when removing the painters mask it stretched and flaked the edge of the glaze.
They went in to the kiln and were pulled out at 950oC and transferred to the reduction bin full of straw and sawdust.
After cooling down and cleaning, they were ready for a first look. I'm really pleased with how they turned out.
The smoke did exactly as I'd hoped and really blackened the bare clay. After drying, it turned to a beautiful smokey grey. I'm going to use the vinyl mask in future beads as I like the nice crisp edge to the glaze, and the fact that you can get more detail with the cutter than my splodgy painting!
I'm really excited to keep experimenting with this technique and will be mixing lots of glazes and cutting new designs for more, I also plan to try this out with my commercial glazes in the electric kiln. It's a really easy technique that gives fantastic results! If you work with ceramics and haven't already, you should give it a try!
Thanks for reading!